Servo Lab

British Standard             : Bs3900, F4 & F9

American Standard        : Astm B117, Astm B 287, Astm D 1735, Astm D 1735, Astmg 85. 1344A, Mil Std. 202F, 810E.

German Standard          : Nfx 41-002, Nfa 91-101

French Standard            : Jis Z 2371

Japan Standard              : Ford General Motors, Honda Jaguar, Nissan Rover, Toyota. Audi / Vwgm 44, Vg 95210, Vg 95332,

Corporation Standard       : 101 (Part-6/Sec-1), Is : 9002 (Part 12), Cass - 5528 & Ass

Indian Standard

Application:

• The Automobile Industrial Components /Other Parts Can Be Washed Either With Chemical Solution Or
• Diesel / Kerosin Before Assembly To Get Rid Of Rust, Dust Foreign Particles Etc.
• This Washing Can Be Done With Solution Heated At 50 To 60°C, With Pressure Though Nozzle

Description:

• Fully Stainless Steel Chamber With Acrylic Transparent Door.
• The Components Can Be Either Stationary Or Rotating And Cleaning Agent Jet Can Have Vertical Or Rotary Movement.
• The Machine Is Equipped With Motor, Pump, Ss Tank, Pressure Gauge, Gate Valves, Pneumatic Cylinder, Plc Panel,
• Timer, Digital Indicators, Sensors Etc.
• The Machine Can Run Either Manual Or Fully Automatic.
• Custom Based Washing Machines As Per Specific Requirement Are Only Made To Suit Their Application.

• Heating mentles are widely used in Industrial Laboratories.
• Variable sizes from 50 ml to 5000 ml are commonly available.
• Temperature upto 450°C ensures different application.
• For efficient heat transfer different heating elements are used for faster boiling.
• Support stand and clamps needed can be provided with the mantle.
• Heat is concentrated on the glass wares through proper insulation and cool outer chamber

Model	Basic	Retort Shaped	V-Shaped	Hi Temp. (650 °C)
Capacity Range Litres	50 Ml To 3000Ml	250 Ml To 20000 Ml	50 Ml To 5000 Ml	50 Ml To 1000 Ml
Insulation	Glass Wool
Material- Outer Case	Mild Steel With Powercoated
Working Temperature ° C	Up To 450 °C
Heat Source	Super Quality Heating Element
Power Source	Ac Single Phase 220 V, 50 Hz

We offer Servo Auto Clave Rectangular / Cylindrical (Horizontal / Vertical

• Lid pressed in dish form with thick stainless steel plate and suitable locking system.
• An adjustable safety valve, pressure gauge and steam release cock provides adequate safety to the operator.
• Other variants are available in roundshape(verticalandhorizontal)asper customer's need.
• Safety backup unit operates to cut off the powersupply when chamber water is below the minimum level

MODE a) Rectangular/Horizontal	SARH 1	SARH 2	SARH 3	SARH 4
b) Cylindrical/Horizontal	SACH 1	SACH 2	SACH 3	SACH 4
c) Cylindrical/Vertical	SACV 1	SACV 2	SACV 3	SACV 4
Chamber Size/Cap a) - L x W x H cm/l	40 x 40 x 60/96	45 x 45 x 80/162	60 x 60 x 120/432	90 x 90 x 150/1215
b) & c) Dia x Depth cm/l	40ø X 60/75	45ø X 80/127	60ø x 120/340	90ø x 150/954
CONSTRUCTION	DOUBLE WALLED
MATERIAL OUTER	Mild steel sheet finished with powder coating
INNER CHAMBER	Stainless Steel
Sterilization system	High pressure through steam boiler
Working pressure kg/cm 2	1 to 1.5
Heater Kw	6	9	12	24
Boiler Capacity (dia x depth) cm/L	30ø x 45/32	45ø x 60/95	55ø x 70/166	60ø x 80/226
Pressure gauge range kg/cm 2	0 to 3
Working Temperature range °C	Ambient + 5° C to 131° C
Temperature controller	PID Digital temp. controller
Safety Valve	Adjustable pressure and Steam cock
Power Source	AC 440v - Three phase/AC 220 v, 50/60 hz, Single phase

Application:

• Continuous Heating, Drying, Curing & Various Other Industrial Purposes.
• Components Are Loaded At One End And Unloaded From Other End Of The Oven.
• Conveyors Are Designed For Specific Tailor Made Items With Different Material
• Such As Chain Conveyor, Slat Conveyor, Apron Conveyor, Nylon Belt Conveyor,
• Wire-Mesh Conveyor Etc.
• The Conveyor Is Having Pre Heating Zone, Heating Zone & Cooling Zone Before
• Unloading The Component. Temp. Set As Per Requirement.
• Heating Source Can Be With Cartridge Heater/Bulbs/Coiled Heating Element Etc.

MODEL	Mostly custom built ovens as per application.
Conveyor size M	30 to 50 Meters
INSULATION	Refractory brick/ Ceramic/ glass wool up to 100 mm thick as per specification
MATERIAL- Outer Chamber	Mild steel with HR Aluminum paint.
Working Temperature ° C	250 to 1000 °C
Temperature controller	Based on the application
Heat source	Electrical/Gas fired/Oil fired
Power Source	AC, 3 phase, 440V, 50 Hz.

• The chamber temperature is maintained uniformly all over by forced air circulation
• to a set temperature controlled by digital temp. controller.
• The structure is rigidly made with heavy duty structural material.
• The door is sealed with silicon rubber gasket minimizes heat loss.
• Dampers control the exhaust and fresh incoming fresh air adjusted manually.
• Safety interlocks are provided for blower and heater for longer life.
• Widely used in industries for Pre-heating, Drying, Alloy steel preparation prior to weld.

MODEL	SHIO 1	SHIO 2	SHIO 3	SHIO 4
CHAMBER SIZE - W x D x H cm	60 x 60 x 60	100 100 x100	150 x 150 x 150	200 x 200 x 200
CONSTRUCTION	DOUBLE WALLED CONSTRUCTION
MATERIAL- Inner Chamber	Stainless steel /ceramic/refractory
MATERIAL- Outer Chamber	Mild Steel structure with powder coated
INSULATION	Ceramic wool/refractory
Working Temperature °C	up to 450 °C
Temperature controller	Digital temperature controller
Heat distribution	Forced air circulation by means of a blower
Heat source	Electrical/Gas fired/Oil fired
Power Source	AC, 3 phase, 440 V, 50 Hz

• Outer robust structure ensure rigity of the furnace.
• Uniform temperature obtained by forced air circulation.
• Smooth upward and downward movement of the door obtained by means of pully
• and counter weight on both sides of the furnace.
• Other accessories are loading system/devices, quenching system temperature
• recorder, temperature controls, thermocouples, alarms, timer ensures desired results.

MODEL	SCF 1	SCF 2	SCF 3	SCF 4
CHAMBER SIZE - W x D x H cm	150 x 250 x 150	180 x 300 x 180	200 x 350 x 200	200 x 350 x 250
CHAMBER LINING	Refractory brick with ceramic fibre modular lined
MATERIAL- Outer Chamber	Mild steel structurals
Door	Vertical raise and fall type with pully and counter weight
Working Temperature ° C	450 to 1000 °C
Temperature controller	Microprocessor based programmable controller & thyristor
Heat source	Electrical /Gas fired/Oil fired
Power Source	AC 3 phase 440 V, 50 Hz

• Overheating of the sample prevented by close temp. Control of the chamber
• with Digital PID temp. Controller to pre set temperature.
• Forced air circulation keeps the chamber temp. Uniform for better operating results.
• Air circulating Fan is interlocked with low wattage heater.
• Tailor made sizes can be manufactured as per the need.
• Door provided with view glass facilitates in observation

MODEL	SBI 1	SBI 2	SBI 3	SBI 4	SBI 5	SBI 6
CHAMBER SIZE - L x W x H cm	35 x 35 x 35	45 x 45 x 45	45 x 45 X 60	45 x 45 x 90	60 x 60 x 60	60 x 60 x 90
CAPACITY Liter	42	91	121	182	216	324
CONSTRUCTION	DOUBLE WALLED
MATERIAL OUTER	Mild steel sheet finished with powder coating
INNER CHAMBER	Stainless Steel
INSULATION	PUF Insulation of 50 mm thick
No. of shelves	2	2	2	3	3	3
Working Temperature range ° C	Ambient to 50 °C
Temperature controller	PID Digital temp. contorller
Temperature accuracy	Adjustable pressure and Steam cock		± 0.5° C
Air Circulation/Motor HP	Forced Air Circulation/1/30 HP
Heater Watt	250	250	500	750	850	850
Power Source	AC 220 V 50/60 hz single phase

• The Water bath is available in Constant Temp.as well as Cryogenic variableTemp.type.
• A hermetically sealed compressor is used to maintain below amp.temp.In Cryogenic water bath.
• Uniform Temp.is maintained by astirrer.
• A ccurate temp.is maintained to preset temp.by Digital PID temp.controller.
• The Water Bath is connected with inlet/outlet pipeline and drain outlet.

MODEL	CONSTANT TEMP. WATER BATH		CRYOGENIC WATER BATH
	S-CT-WB 1	S-CT-WB 2	S-CR-WB 1	S-CR-WB 2
CHAMBER SIZE - L x W x H cm	25 x 25 x 25	30 X 30 x 30	25 x 25 x 25	30 X 30 x 30
Capacity liter	15.6	27	15.6	27
CONSTRUCTION	DOUBLE WALLED
MATERIAL OUTER	Mild steel sheet finished with powder coating
INNER CHAMBER	Stainless Steel
Air Circulation/Motor HP	Forced Air Circulation/1/30 HP
Heater watt	1000	1500	2000	2500
Working Temperature range ° C	100	100	20 - 100	20 - 100
Temperature controller	Digital PID Temp. controller
Temperature accuracy	± 0.5° C
INSULATION	50 mm thick PUF thermal resistance
Hermetically sealed compressor			Provided	Provided
Water Stirrer	Provided	Provided	Provided	Provided
Refrigeration accessories			Provided	Provided
Power Source	AC 220 V 50/60 hz single phase

• Temperature below ambient is maintained by hermetically sealed compressor.
• Refrigeration cooling coil fitted in the inner chamber.
• Temperature is controlled accurately by digital PID temp. controller to the pre set chamber temp.
• Other controls include power supply indicator, freezer thermometer, deep freezer setting for freezer etc.
• Manual defrost.

MODEL	SDF 1 ( -40°/-85° C)	SDF 2 ( -40°/-85° C)
CHAMBER SIZE - L x W x H cm	45 x 45 x 45	60 x 60 x 60
CAPACITY liter	91	216
CONSTRUCTION	DOUBLE WALLED
MATERIAL OUTER	Mild steel sheet finished with Plastic Paint
INNER CHAMBER	Stainless Steel
Hermetically sealed compressor	Provided
Working Temperature range °C	up to - 40° C/up to - 85° C
Temperature controller	Digital PID Temp. controller
Temperature accuracy	± 0.5° C
INSULATION	75 mm thick PUF thermal resistance
Power Source	AC 220 V 50/60 hz single phase

• Temperature below ambient is maintained by hermetically sealed Compressor.
• Humidity created by a boiler with a heat source positioned inside chamber.
• Temperature is controlled accurately by microprocessor based programmable controller with in ± 0.5°C.
• The door contains View glass, Gasket, wiper etc.

MODEL	S Env TC- 1	S Env TC- 2	S Env TC- 3
CHAMBER SIZE - L x W x H cm	45 x 50 x 65	60 x 60 x 60	90 x 90 x 90
No of Shelves	2	3	3
Construction	Double walled chamber
MATERIAL Outer	Mild steel sheet finished with powder coating
Inner chamber	Stainless Steel
Air circulation/Motor HP	Forced Air Circulation/
Heater kw	2.5	4.5	6
Working Temperature range ° C	40 to 150 ° C
Temperature controller	Microproccessor based programmable controller
Temperature accuracy	± 0.5° C
Relative humidity range	60 % to 90% ± 2 % accuracy
INSULATION	50 mm thick PUF thermal resistance
Power Source	AC 220 V 50/60 hz single phase

Furnace structure robustly designed & fabricated with heavy duty channel/angles for rigidity.
Door operation is supported by pully & counter weight for easy handling.
Refractory brick lining in the chamber with stands uneven heavy loads.
Bogie is lined with high density Alumina bricks capable of resisting concentrated loads.
Bogie travels with slow speed on either side of the furnace on guides.
Asbestos seal on door ensure low heat loss.

MODEL	SBHF 1	SBHF 2	SBHF 3	SBHF 4
CHAMBER SIZE - W x D x H cm	100 x 100 x 100	150 x 150 x 100	150 x 250 x 150	150 X 300 x 200
CHAMBER LINING	Refractory brick with ceramic fibre modular lined
MATERIAL- Outer Chamber	Mild steel structurals
Door	Vertical raise and fall type with pully and counter weight
Working Temperature ° C	up to 1000 °C
Temperature controller	Microprocessor based programmable controller & thyristor
Heat source	Electrical /Gas fired/Oil fired
Power Source	AC 3 phase 440 V, 50 Hz

We offer Servo Hot Air Oven - Memmert Type

• Temperature is controlled accurately by digital PID temp. controller
• to the pre set chamber temperature.
• Forced air circulation by fan maintains the chamber temp. uniform.
• Stainless steel shelves can be provided as needed.
• Imported heating element for more life.
• Temperature is controlled accurately by digital PID temp. controller

MODEL	SHAO 1	SHAO 2	SHAO 3	SHAO 4
CHAMBER SIZE - L x W x H cm	35 X 35 x 35	45 x 45 x 45	60 x 60 x 60	90 x 90 x 90
CONSTRUCTION	Tripple walled Chamber
MATERIAL- Outer Chamber	Mild steel sheet finished with powder coating
Intermediate Chamber	M.S. sheet finished with powder coating
Inner chamber	Stainless Steel
Air Circulation/Motor HP	Forced air circulation/0.5 to 1 HP
Heater KW	2	2	3	4.5
Heating element	Imported U shaped air heating tube
Working Temperature range ° C	5 - 50 Amp + 5° to 250°C
Temperature controller	Digital PID Temp. controller
Temperature accuracy	± 0.5° C
INSULATION	75 mm thick Epoxy bonded therma
Sheleves	as per customer requirement.
Power Source	AC 220 V 50/60 hz single phase

We offer Vertical & Horizontal Servo Laminar Flow Systems

• This is made of Teak /marine ply wood with laminated melamine finish on
• external & antifungal epoxy coat on internal surface.
• Door is made of 6mm thick clear acrylic sheet either hinged at the top or
• operated by counter weight.
• An air blower sucks atmospheric air through primary filter & passed through
• 0.3 micron HEPA filter having 99.99 % efficiency.
• Temperature is controlled accurately by digital PID temp. controller to the pre set
• chamber temperature.
• Air flow designed as per standard BS 5726,appendix A (.45m/sec -.65m/sec)
• Other accessories are Illumination light, UV Lamp, incline Mano meter & Gas cock.
• This is made of Teak /marine ply wood with laminated melamine finish on

MODEL Vertical	SLFV 1	SLFV 2	SLFV 3	SLFV 4
Horizontal	SLFH 1	SLFH 2	SLFH 3	SLFH 4
WORK TABLE SIZE W x D x H cm	60 x 60 x 60	90 x 60 x 60	120 x 60 x 60	180 x 60 60
MATERIAL	TEAK /MARINE PLY WOOD
FINISH EXTERNAL	LAMINATED MELAMINE
INTERNAL	ANTIFUNGAL EPOXY COATED
WORK TABLE	PARTIALLY PERFORATED STAINLESS STEEL
DOOR	TRANSPARENT ACRYLIC
PROCESS	AIR SUCTION & DISCHARGE THROUGH BLOWER
SUCTION FILTER	0.3 micron HEPA Filter - 99.99% Efficiency
Vibration Level micron	2.5
Noise Level dB	65
Power Source	AC 220 V 50/60 Hz single phase